18-03-2021, 03:06 PM
I would use something easy to play with to model it first - say 25 x 3 mm ali strip.
Maybe tapered off and pushed into 20 or 25 mm round tubes for the cross members.
That way you can get the geometry right by way of easy bending and inexpensive errors.
Once you know it is going to do what you want as a frame you can make a proper one, without expensive errors.
Maybe tapered off and pushed into 20 or 25 mm round tubes for the cross members.
That way you can get the geometry right by way of easy bending and inexpensive errors.
Once you know it is going to do what you want as a frame you can make a proper one, without expensive errors.