07-03-2021, 09:43 PM
I took the cam gear off our car last week with the engine in situ. As I always have used the 3-leg puller. Need to take out the top bolt hold the front main bearings.
Just do it up firmly then hit the puller bolt firmly and off it comes.
With any puller it is hitting the bolt that does the job. Never try to pull it of using just the bolt.
Cleared the oil feed to the front bearing & re-assembled.
No problem.
Just do it up firmly then hit the puller bolt firmly and off it comes.
With any puller it is hitting the bolt that does the job. Never try to pull it of using just the bolt.
Cleared the oil feed to the front bearing & re-assembled.
No problem.
Jim