04-03-2021, 07:00 PM
Hi Zeto,
I understand your point. The wheel will be running on a different part of the worm, this could wear faster and put out the adjustment. To return the worm to its original position one would need to remove the bottom nut and the bottom brass bush and turn about 3.25mm from the face. I have not removed the bush, so I dont know if there is enough material on the face of the bush to do that. I shall try it and see if the steering has been improved first. thank you for the thought though.
I understand your point. The wheel will be running on a different part of the worm, this could wear faster and put out the adjustment. To return the worm to its original position one would need to remove the bottom nut and the bottom brass bush and turn about 3.25mm from the face. I have not removed the bush, so I dont know if there is enough material on the face of the bush to do that. I shall try it and see if the steering has been improved first. thank you for the thought though.