19-02-2021, 06:27 PM
I just take stuff into work, there is a redundant press skulking in the corner of the workshop I hide in, we also have a more modern one in another workshop and a massive 50 tonne one in our machine shop and a nice old surface grinder and a spark eroder.
I still like blocks of hardwood and hammers though. I keep them in the garage and shed.
I also have a selection of nice brass / bronze drifts.
The last cam gear I removed came off with a light tap with a brass drift on the rear face, Genuine Nippy one as well, in fact the whole engine was easy to dismantle and taking the flywheel off was no problem even though it was quite rusty.
I still like blocks of hardwood and hammers though. I keep them in the garage and shed.
I also have a selection of nice brass / bronze drifts.
The last cam gear I removed came off with a light tap with a brass drift on the rear face, Genuine Nippy one as well, in fact the whole engine was easy to dismantle and taking the flywheel off was no problem even though it was quite rusty.