21-01-2018, 05:28 PM
(This post was last modified: 21-01-2018, 05:30 PM by Ruairidh Dunford.)
You have reminded me to take a picture as well Gary.
I think part of the issue with the rod on your passenger door is that it is not sitting straight, it angles down quite steeply from the bracket. If you open the hole upwards to allow the rod to enter at right angles to the upright you will almost certainly find it shuts without any issues.
This is the one on my Pearl for comparison...
I think part of the issue with the rod on your passenger door is that it is not sitting straight, it angles down quite steeply from the bracket. If you open the hole upwards to allow the rod to enter at right angles to the upright you will almost certainly find it shuts without any issues.
This is the one on my Pearl for comparison...