10-02-2021, 11:01 AM
I agree with Tony, cracks not unusual in that position and ok to use as long as there ar no cracks going to the bore.Crack will often be seen heading toward the valves again no great cause for concern.
Definitely would NOT try to repair as you have to remove metal to do a stitch repair, you don’t have much to start with!
Cracks into the bores render the block scrap ie not repairable.
Definitely would NOT try to repair as you have to remove metal to do a stitch repair, you don’t have much to start with!
Cracks into the bores render the block scrap ie not repairable.