The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SU conversion
#14
Hi, 

I originaly started this thread back in November when I was contemplating replacing my up-draft Zenith with an SU. After taking advice from this forum, and also finding some needle info on the old forum, I have just completed the job.

I'm just posting this now to thank those who offered their advice, and also to state what bits I ended up using incase anyone else is searching for the same information.

I managed to buy an SU 1 inch OM type carb on ebay. I know these are quite difficult to come by, but it was worth seeking one out as it made a nice neat compact installation with no flange adaptors etc. I used a standard late side-draught type combined inlet/ exhaust manifold, and an AN needle. (I tried a couple of other needles but the AN gave the best pick-up and mid-range acceleration).  I've road tested the car with a full scuttle tank and no pump, but I plan to fit a Moggy Minor type LP SU pump.

So thanks again folks for all your advice. This forum really is a great asset to 7 owners.


Robin in cold West Sussex.
Reply


Messages In This Thread
SU conversion - by Robin Gooders - 04-11-2017, 10:31 PM
RE: SU conversion - by Peter Naulls - 04-11-2017, 11:10 PM
RE: SU conversion - by Robin Gooders - 05-11-2017, 12:05 AM
RE: SU conversion - by Derek Sheldon - 05-11-2017, 12:24 AM
RE: SU conversion - by Bob Culver - 05-11-2017, 01:48 AM
RE: SU conversion - by Jeff Taylor - 05-11-2017, 12:23 PM
RE: SU conversion - by Chris KC - 05-11-2017, 09:02 AM
RE: SU conversion - by Alan - 05-11-2017, 10:51 AM
RE: SU conversion - by Bob Culver - 05-11-2017, 07:07 PM
RE: SU conversion - by Austin in the Shed - 05-11-2017, 09:07 PM
RE: SU conversion - by Peter Naulls - 05-11-2017, 11:59 PM
RE: SU conversion - by Paul N-M - 20-01-2018, 02:41 PM
RE: SU conversion - by Robin Gooders - 06-11-2017, 12:27 AM
RE: SU conversion - by Bob Culver - 09-11-2017, 08:10 PM
RE: SU conversion - by Robin Gooders - 19-01-2018, 07:06 PM
RE: SU conversion - by Ian Williams - 19-01-2018, 09:01 PM
RE: SU conversion - by Colin Swinbourne - 19-01-2018, 09:40 PM
RE: SU conversion - by Robin Gooders - 20-01-2018, 10:21 AM
RE: SU conversion - by GK5268 - 19-01-2018, 11:58 PM
RE: SU conversion - by Colin Swinbourne - 20-01-2018, 10:47 AM
RE: SU conversion - by Terry McGrath - 20-01-2018, 01:13 PM
RE: SU conversion - by Malcolm Parker - 20-01-2018, 02:31 PM
RE: SU conversion - by Colin Wilks - 21-01-2018, 11:27 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)