19-01-2021, 11:58 PM
We had a specialist workshop turn 1/32" off the outer ring non thrust face on SKF ALS 8, RHP LJT 1" with a ceramic tool while still assembled.
My list shows the original bearings were SKF W6898, R&M 3LJT 1". With the outer ring narrowed all other dimensions are the same. It is unlikely you will find a matched pair but the standard pair are usually acceptable.
If you are keen, the standard bearings can be shimmed to give around 2 thou preload.
My list shows the original bearings were SKF W6898, R&M 3LJT 1". With the outer ring narrowed all other dimensions are the same. It is unlikely you will find a matched pair but the standard pair are usually acceptable.
If you are keen, the standard bearings can be shimmed to give around 2 thou preload.