18-12-2020, 08:41 PM
Hi Oliver,
As Reckless has said it is a Oil problem,
The Only way to fix is remove Engine, because it looks like a rebore and new pistons and Rings also the Block & Head will need to be faced.
If you look at the Head gasket you will see that it is ready to go between water jacket & cylinder in two places.
Regarding head gasket do not be tempted to just clean head and block as you will allready be having Machine work done so the Facing will not add much to the bill
Do it once do it right less pain in the long run
All the Best
Colin
NZ
As Reckless has said it is a Oil problem,
The Only way to fix is remove Engine, because it looks like a rebore and new pistons and Rings also the Block & Head will need to be faced.
If you look at the Head gasket you will see that it is ready to go between water jacket & cylinder in two places.
Regarding head gasket do not be tempted to just clean head and block as you will allready be having Machine work done so the Facing will not add much to the bill
Do it once do it right less pain in the long run
All the Best
Colin
NZ