06-12-2020, 07:08 PM
thank you all.
its a long process, cad drawings, metal quality checks.
this is the samples stage, which has been checked and OK`d
and now the final stage, whaiting for manufacturers and delivery.
notice we have also done new tappets and locking nut.
the tappets are machined from scratch, rather than cutting corners. machining down high tensil bolts.
strange one with colin`s followers.
i supplied them as good used, the pitting is under the surface. and has come through in grinding.
ive seen it before.
original parts are very high quality, but every now and again you find the incusions when reconditioning.
tony
its a long process, cad drawings, metal quality checks.
this is the samples stage, which has been checked and OK`d
and now the final stage, whaiting for manufacturers and delivery.
notice we have also done new tappets and locking nut.
the tappets are machined from scratch, rather than cutting corners. machining down high tensil bolts.
strange one with colin`s followers.
i supplied them as good used, the pitting is under the surface. and has come through in grinding.
ive seen it before.
original parts are very high quality, but every now and again you find the incusions when reconditioning.
tony