29-11-2020, 06:11 PM
I would have expected the baffle to be soldered into place, that's what I do when making petrol tanks. Your difficulty will be putting the baffle into the right position and hoping to re-solder it into place. (no flame, a big copper iron only, you don't want to end up wearing it!)
If it's not causing you problems as you lurch round corners I would definitely leave well alone.
If it is causing problems probably the best way to sort it would be to take one end off so that you can see what you are doing.
If it's not causing you problems as you lurch round corners I would definitely leave well alone.
If it is causing problems probably the best way to sort it would be to take one end off so that you can see what you are doing.