Balancing Conrods

[Jamie]

Hi ,
I have got eight of them with huge difference in section and weight.
I might even have a complete set of big end bolts out of all of them.
When I took an engine apart recently there were brass shims under the big end caps on some of the rods.
The crankshaft is intact as well !!! I have not had it crack tested though.

---

Jamie,
The Garden shed has given up two big end caps.
One at 75 grams ( it has been lightened )
One at 80 grams.
Sent me a message if an end cap will help.
Weigh your end caps and see if they are less than 80 grams with no shells.

Cheers Dickie

I have sent you a private message, Dickie

Regards,

Jamie.