23-11-2020, 09:24 AM
On my Pytchley saloon I made some sliding window pulls that are very similar in form to the 'T' type pictured above. I used thin brass sheet which I folded over a piece of steel the same thickness as the glass. At the 'T' end I used a short length of brass rod and rolled the brass sheet around it, soldering it in place. I attached the pull to the glass with a colourless glass bonding adhesive. The result is very period looking. I made matching pulls for the opening windscreen and the smokers hatch in the roof. I painted them satin black but they could easily be nickel plated.