17-11-2020, 01:41 PM
I have all LED lights including indicators I have never had problems except for a failure of an electronic flasher unit. It is essential that all earthing is sound.
Flashing bulbs are OK. The timing is done electronically and will be very accurate. If switched on together they will stay perfectly in sync. Also no flasher unit is needed.
With flashing bulbs available for both the semaphore indicators and the individual ones there should be no problems. Just power them all from one source.
You'd need to talk to LED suppliers to confirm that the flashing bulbs for semaphores have the same flash rate as the others.
Flashing bulbs are OK. The timing is done electronically and will be very accurate. If switched on together they will stay perfectly in sync. Also no flasher unit is needed.
With flashing bulbs available for both the semaphore indicators and the individual ones there should be no problems. Just power them all from one source.
You'd need to talk to LED suppliers to confirm that the flashing bulbs for semaphores have the same flash rate as the others.
Jim