Hi John,
Never late for praising me my friend!
Stuart:
"I have put a travelling hoist in each of the garages and workshops here."
Now I'm jealous! Why did'nt I built rather one like that?
Well done and everything very neat! Then I would say, seeing all your workshops and with all due respect, that you are just a bit glutton!
Hello Bruce,
Here's the view from my place
![[Image: dsc_0642.jpg]](https://i92.servimg.com/u/f92/16/04/00/18/dsc_0642.jpg)
Never late for praising me my friend!
(07-11-2020, 10:13 PM)David Stepney Wrote: It’s funny you should say that. The other evening, my Landrover blew a coreplug at the back of the cylinder head. So I am going to have to get the head off to do the job. The trouble is that. The Landrover is too tall to go into the garage!I remember going down a long ramp to reach a parking under a hotel in Toulouse just to discover that I could not enter with the Vito... I had to deflate the tyres under may wife's dreadfully reprobative frown.
(07-11-2020, 10:13 PM)David Stepney Wrote: It’s funny you should say that. The other evening, my Landrover blew a coreplug at the back of the cylinder head. So I am going to have to get the head off to do the job. The trouble is that. The Landrover is too tall to go into the garage!
(08-11-2020, 12:41 AM)Tony Griffiths Wrote: Some very useful machine-tools as well; always a great help in getting jobs done. How anyone manages without at least a lathe and drill press I cannot imagine.So do I Tony. The lathe and small mill were my late father's as was the heavy (170 pouds) TIG. The large old italian mill on the left I bought some years ago very damaged and incomplete and rebuilt it.
Stuart:
"I have put a travelling hoist in each of the garages and workshops here."
Now I'm jealous! Why did'nt I built rather one like that?
Well done and everything very neat! Then I would say, seeing all your workshops and with all due respect, that you are just a bit glutton!
Hello Bruce,
Here's the view from my place