02-11-2020, 07:28 PM
Bill, I think this is a big seven.
12, poss piston knock, were the bores honed, I think you made ref to a wear ridge how was that dealt with?
Are the pistons back in the right way round ie split to non thrust side.
Is the ign timing a tad over advanced.
Small end bolts tightened?
12, poss piston knock, were the bores honed, I think you made ref to a wear ridge how was that dealt with?
Are the pistons back in the right way round ie split to non thrust side.
Is the ign timing a tad over advanced.
Small end bolts tightened?