01-11-2020, 08:48 PM
I thought I had put in my fourpennorth, but obviously forgot to press send!
I had a similar problem with my29 RK 101380. I had the rubber seals not pressed right up to the ridge on the bonnet (gave me over 1/2")and also made some of the lower mounting holes & the top stay holes oval by about 1/8". Because of the "leverage" that made a lot of difference & it now fits nicely. I think a chrome rad was a feature of the 1929 models...it is mentioned in the advertising literature!
Good luck!
I had a similar problem with my29 RK 101380. I had the rubber seals not pressed right up to the ridge on the bonnet (gave me over 1/2")and also made some of the lower mounting holes & the top stay holes oval by about 1/8". Because of the "leverage" that made a lot of difference & it now fits nicely. I think a chrome rad was a feature of the 1929 models...it is mentioned in the advertising literature!
Good luck!