Ulster manifold, fishtail and pipe...

[Malcolm Parker]

Dave Dye is the man for a manifold, he produces a very high quality job.   As for the tail pipe, I bought a length of steel tube and had it bent to shape by a local engineering firm that produce car roll cages.  I took them a plywood template of what I wanted and they knocked me a couple up in about half an hour.  With hindsight I should have used a thicker gauge pipe as it would have bent better.
I have a good contact for making silencers and fish-tails but he is near Spurn Point, even from North Yorkshire it takes a week to get there!