The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
Grinding a phoenix crank

Thread Rating:
  • 2 Vote(s) - 3.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Grinding a phoenix crank
Charles P Offline
Eternal Repairer
*****
Joined: Aug 2017 Posts: 1,540 Threads: 62
Reputation: 20
#3
08-01-2018, 08:08 AM
Mine was ground 0.25mm (~10thou) under about 15 years ago and is going strong.
Generally 10 thou under is fine and is unlikely to go through the nitriding. Going further than that might go through, or then again it might not. It depends upon the thickness of the casing which depends upon a heap of manufacturing variations. 
Shells are available. 

Charles
Reply


Messages In This Thread
Grinding a phoenix crank - by John L - 08-01-2018, 01:27 AM
RE: Grinding a phoenix crank - by Bob Culver - 08-01-2018, 04:14 AM
RE: Grinding a phoenix crank - by Charles P - 08-01-2018, 08:08 AM
RE: Grinding a phoenix crank - by John L - 08-01-2018, 09:52 AM
RE: Grinding a phoenix crank - by Colin Reed - 08-01-2018, 09:54 AM
RE: Grinding a phoenix crank - by Stuart Giles - 08-01-2018, 10:35 AM
RE: Grinding a phoenix crank - by Zetomagneto - 08-01-2018, 02:34 PM
RE: Grinding a phoenix crank - by leaf200 - 08-01-2018, 02:21 PM
RE: Grinding a phoenix crank - by John L - 08-01-2018, 02:25 PM
RE: Grinding a phoenix crank - by Stuart Giles - 08-01-2018, 09:04 PM
RE: Grinding a phoenix crank - by Zetomagneto - 09-01-2018, 09:26 PM
RE: Grinding a phoenix crank - by David Cochrane - 08-01-2018, 11:06 PM
RE: Grinding a phoenix crank - by Charles P - 09-01-2018, 12:15 AM
RE: Grinding a phoenix crank - by Barker - 09-01-2018, 05:45 AM
RE: Grinding a phoenix crank - by Charles P - 09-01-2018, 06:54 AM
RE: Grinding a phoenix crank - by Stuart Giles - 10-01-2018, 10:51 AM
RE: Grinding a phoenix crank - by Zetomagneto - 10-01-2018, 02:14 PM

Forum Jump:


Users browsing this thread: 6 Guest(s)