18-10-2020, 08:10 AM
John
The core on my car is 300mm wide and 400mm deep. It is a modern core (hence the mm) fitted into original top and bottom tanks.
If you are retaining the thermosyphon system then remember to mount the rad high enough to get a good flow. It also helps to have a relatively large header tank. Unless of course you fit a pump. Fitting a four blade fan might also help a bit.
Cheers
Howard
The core on my car is 300mm wide and 400mm deep. It is a modern core (hence the mm) fitted into original top and bottom tanks.
If you are retaining the thermosyphon system then remember to mount the rad high enough to get a good flow. It also helps to have a relatively large header tank. Unless of course you fit a pump. Fitting a four blade fan might also help a bit.
Cheers
Howard