The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.29 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
Power TO the dynamo!

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Power TO the dynamo!
Stuart Giles Offline
Old Git
****
Joined: Aug 2017 Posts: 741 Threads: 8
Reputation: 11
Location: N W Kent
#14
17-10-2020, 09:42 PM
Presume from it's place in the circuit that the cutout relay has been replaced with a power diode and the original open wire wound resistor has been replaced with a power resistor. A basic test of the diode with a meter on the lowest Ohms resistance scale would be to make sure that you have continuity in one direction only. Just reverse the meter leads when you see continuity across the diode and continuity should disappear. With the meter on the same lowest Ohm scale you should see continuity between D and F2.
Reply


Messages In This Thread
Power TO the dynamo! - by David.H - 14-10-2020, 04:52 PM
RE: Power TO the dynamo! - by Bob Culver - 14-10-2020, 07:49 PM
RE: Power TO the dynamo! - by Howard Wright - 15-10-2020, 10:22 AM
RE: Power TO the dynamo! - by David.H - 15-10-2020, 02:48 PM
RE: Power TO the dynamo! - by andrew34ruby - 15-10-2020, 07:19 PM
RE: Power TO the dynamo! - by Stuart Giles - 15-10-2020, 07:22 PM
RE: Power TO the dynamo! - by David.H - 15-10-2020, 09:53 PM
RE: Power TO the dynamo! - by Bob Culver - 16-10-2020, 01:03 AM
RE: Power TO the dynamo! - by JonE - 16-10-2020, 12:13 PM
RE: Power TO the dynamo! - by Stuart Giles - 17-10-2020, 08:48 AM
RE: Power TO the dynamo! - by JonE - 17-10-2020, 09:18 AM
RE: Power TO the dynamo! - by Stuart Giles - 17-10-2020, 11:13 AM
RE: Power TO the dynamo! - by JonE - 17-10-2020, 08:57 PM
RE: Power TO the dynamo! - by Stuart Giles - 17-10-2020, 09:42 PM
RE: Power TO the dynamo! - by Ian McGowan - 18-10-2020, 01:23 AM
RE: Power TO the dynamo! - by JonE - 18-10-2020, 08:45 AM
RE: Power TO the dynamo! - by David.H - 20-10-2020, 09:17 PM
RE: Power TO the dynamo! - by Bob Culver - 21-10-2020, 12:38 AM
RE: Power TO the dynamo! - by JonE - 21-10-2020, 01:44 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)