Power TO the dynamo!

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Power TO the dynamo!

JonE

....

Joined: Aug 2017 Posts: 3,329 Threads: 372
Reputation: 16
Car type:

#11

17-10-2020, 09:18 AM

Thanks, so I can discount that one. But the CFR2 has a diode and a modern resistor so wondering either of those could have failed.
Next question - should the charging light operate (with IGN on) if the dynamo is removed and the two wires to it are loose? I've found the dynamo has issues inside, but initially the whole shebang had been lighting up and indicating, quite correctly, no charge. Then after a period, the light no longer worked. Bulb of course fine. One Voltage test indicated 2 volts across terminals to bulb.

https://ulster7.wordpress.com https://sevenrk.wordpress.com/

« Next Oldest | Next Newest »

Messages In This Thread

Power TO the dynamo! - by David.H - 14-10-2020, 04:52 PM

RE: Power TO the dynamo! - by Bob Culver - 14-10-2020, 07:49 PM

RE: Power TO the dynamo! - by Howard Wright - 15-10-2020, 10:22 AM

RE: Power TO the dynamo! - by David.H - 15-10-2020, 02:48 PM

RE: Power TO the dynamo! - by andrew34ruby - 15-10-2020, 07:19 PM

RE: Power TO the dynamo! - by Stuart Giles - 15-10-2020, 07:22 PM

RE: Power TO the dynamo! - by David.H - 15-10-2020, 09:53 PM

RE: Power TO the dynamo! - by Bob Culver - 16-10-2020, 01:03 AM

RE: Power TO the dynamo! - by JonE - 16-10-2020, 12:13 PM