23-09-2020, 07:44 PM
Stuart's advise is spot on.
Depending on your particular layout its not too difficult to come up with a mounting for your steering box. It has to be strong enough not to flex though. Re outside of chassis located torque arms this can be more difficult. You must avoid the anti roll bar effect trap. This can be done if the arms are articulated at both ends. Using twin arms both sides also lets you set castor as well as location.
Depending on your particular layout its not too difficult to come up with a mounting for your steering box. It has to be strong enough not to flex though. Re outside of chassis located torque arms this can be more difficult. You must avoid the anti roll bar effect trap. This can be done if the arms are articulated at both ends. Using twin arms both sides also lets you set castor as well as location.