14-09-2020, 10:43 PM
Many years ago I white metaled my own rods initially machining the bore and then scraping generally as you discussed.
The only thing I do recall is that I had some similar issues to you which eventually turned out not to be the bearing diameter itself but the radius where the big end white metal is machined to clear the radius on the crank.
I eventually slightly scraped this radius and all was well.
John.
The only thing I do recall is that I had some similar issues to you which eventually turned out not to be the bearing diameter itself but the radius where the big end white metal is machined to clear the radius on the crank.
I eventually slightly scraped this radius and all was well.
John.