31-08-2020, 02:46 PM
That's great, Steve. Many thanks. This will be a very useful reference picture. Just for the record, could you please confirm the model and year of your car?
I'm just in the process of shaping a couple of timber window heads for RL/RMs. I've made repros of the pressed steel channels that collect the water, with the extensions that pass into the head, but was stuck on how and where to bring them out - stupid, really, as I must have seen these before without taking enough notice.
Could I ask one more favour? What are the width and depth measurements of the cover plates.
It's now obvious that the outlet arrangements must be completely different on the RN, although the upper end appears to be near enough the same. Another puzzle to solve!
I'm just in the process of shaping a couple of timber window heads for RL/RMs. I've made repros of the pressed steel channels that collect the water, with the extensions that pass into the head, but was stuck on how and where to bring them out - stupid, really, as I must have seen these before without taking enough notice.
Could I ask one more favour? What are the width and depth measurements of the cover plates.
It's now obvious that the outlet arrangements must be completely different on the RN, although the upper end appears to be near enough the same. Another puzzle to solve!