02-01-2018, 03:17 PM
A good place to start would be some reading Arthur.
Try:
Austin Seven Specials by Bill Williams
also,
Design for Competition and Austin Seven Companion both by 750MC
These detail modifications that many had used over the years and will assist in planning the route you want to take.
Hadley, Allen, Barlow, Pheonix (and others) have all produced cranks (splash, pressure, 1 5/16” and 1 1/2” counterbalanced etc. options) and Zeto appears to be producing some as well now.
Decide what your end goal is and then come back with questions.
Every build is different and one document would not be sufficient.
Try:
Austin Seven Specials by Bill Williams
also,
Design for Competition and Austin Seven Companion both by 750MC
These detail modifications that many had used over the years and will assist in planning the route you want to take.
Hadley, Allen, Barlow, Pheonix (and others) have all produced cranks (splash, pressure, 1 5/16” and 1 1/2” counterbalanced etc. options) and Zeto appears to be producing some as well now.
Decide what your end goal is and then come back with questions.
Every build is different and one document would not be sufficient.