23-08-2020, 03:04 PM
(This post was last modified: 23-08-2020, 03:17 PM by Ian McGowan.)
You can't dismiss the wiring as a possible cause however much you believe that you have checked it; it is the only component in the circuit that you haven't replaced!
However I agree that it isn't the LEDs, or the dip switch so, there is obviously a short to earth of the wiring between the dip-switch (in the dip position) and the dipped beam filaments (or LEDs) of the headlights. POSSIBLY on one of the headlight bulb connectors inside the HL shell?
However I agree that it isn't the LEDs, or the dip switch so, there is obviously a short to earth of the wiring between the dip-switch (in the dip position) and the dipped beam filaments (or LEDs) of the headlights. POSSIBLY on one of the headlight bulb connectors inside the HL shell?