22-08-2020, 06:21 PM
(This post was last modified: 22-08-2020, 06:25 PM by Ian McGowan.)
Richard, it is about 55 years since I fiddled around with one of the illustrated here indicator switches on my A35 but, I believe that the earth is provided only to complete the circuit of the warning light so being redundant in your case.
You need to ignore the earth and connect the live wire to "flasher unit" terminal there-by enabling its connection, when the switch is operated, to the appropriate side indicator ("LH or RH flasher" on the drawing).
You need to ignore the earth and connect the live wire to "flasher unit" terminal there-by enabling its connection, when the switch is operated, to the appropriate side indicator ("LH or RH flasher" on the drawing).