01-08-2020, 12:14 AM
(31-07-2020, 01:09 PM)Duncan Grimmond Wrote: Interesting that copy Best & Lloyd pumps were mentioned as I had exactly the same experience. The pump looked good and was reasonably well finished but did not work due to the lack of a one-way valve. I had the devil's own job convincing the seller that the pump did not work without a non-return ball bearing/spring in a fitting that wasn't there. The plunger went up and down moving the oil in the barrel but was unable to keep and transfer a fresh charge past the leather washer on the down-stroke. 6 emails later and the threat of a Paypal dispute eventually convinced him to accept a return and full refund.I actually emailed the seller and told him, in detail, what was needed - I'd even managed to source - incredibly - all the required parts as NOS. Did I email him pictures with dimensions - there was no response.