15-07-2020, 09:30 AM
Nick,
I found the same issues. The simplest solution seemed to be to place a thick piece of plywood under the battery and another, triangular-shaped piece vertically beneath the speedo cable. You can then tighten the correct corner-clamp without trapping the cable. Use a good thick grommet where the cables exit the box - I've seen a few spark-eroded holes over the years!
Peter.
I found the same issues. The simplest solution seemed to be to place a thick piece of plywood under the battery and another, triangular-shaped piece vertically beneath the speedo cable. You can then tighten the correct corner-clamp without trapping the cable. Use a good thick grommet where the cables exit the box - I've seen a few spark-eroded holes over the years!
Peter.