03-07-2020, 09:22 AM
I did wonder whether I should try and unbend the tab washers to see if the set screws need tightening Dave, so will give that a go. On the evidence I think it will be only two of them.
As for the oil level......I refilled with the recommended 7/8 pint original spec which prompted my question. I noticed yesterday however that there are two little holes in the bottom of the axle near the wheels and one of these is leaking oil. So it would seem less quantity is needed, as you all have been advising. Thank you.
I don’t drink coke unfortunately squeak.......what do I do now!!
Brian.
As for the oil level......I refilled with the recommended 7/8 pint original spec which prompted my question. I noticed yesterday however that there are two little holes in the bottom of the axle near the wheels and one of these is leaking oil. So it would seem less quantity is needed, as you all have been advising. Thank you.
I don’t drink coke unfortunately squeak.......what do I do now!!
Brian.
Brian Rosevear