30-06-2020, 08:47 PM
The early coil nosecone with a threaded bush, and the later non threaded nosecone for 3 speed cars are different lengths. I couldnt remember which way, but I had thought the bushed one was shorter. I tried putting the chummy engine in the RL. Fundamentally it didn't work as a straight swap, due to the different lengths.
Similarly I had always believed the nosecone for the 4 speed cars were 3/4 inch shorter than the non bushed 3 speed nosecone. That is the nosecone on my daughters RP is 3/4 shorter than the nosecone on my RL. The RP one is also iron!.
Similarly I had always believed the nosecone for the 4 speed cars were 3/4 inch shorter than the non bushed 3 speed nosecone. That is the nosecone on my daughters RP is 3/4 shorter than the nosecone on my RL. The RP one is also iron!.