24-12-2017, 12:53 PM
(This post was last modified: 24-12-2017, 12:59 PM by trevorcharlesmorgan.)
(24-12-2017, 11:01 AM)Alan Wrote: It sounds to me like more than manifold studs. I think a leak from there would dribble not gush. Are you sure that the cylinder head gasket is tight?
I did torque it up correctly I believe and it was a fresh gasket, I've just bought some gasket sealant and am going to try and use that with another new head gasket.
(24-12-2017, 11:03 AM)Nick Salmon Wrote: It so happens that I recently did this very job and at the same time I thought I would make a photographic record of 'how to'. If it is of any use or help to anyone for the time being you can download the PDF file from here:
https://tinyurl.com/y8wze97f
If Management would like to keep it on the forum servers, feel free.
All usual disclaimers - it's how I choose to do it, which may not be how it is supposed to be done 'by the book'.
![[Image: wink.png]](http://www.austinsevenfriends.co.uk/forum/images/icons/wink.png){kind=icon}
That's really great presentation, very useful, thank you.