07-06-2020, 07:04 AM
(This post was last modified: 07-06-2020, 07:16 AM by Derek Sheldon.)
Colin , that is soft or lead soldering . Good advice .
, wrong procedure.
I have used the Turbo set 90 ( found on EBay £111) successfully for several years , a workshop must as far as I am concerned. As previously stated , fluxed rods are preferable for most jobs , thinner none fluxed with a tin of flux powder can be of use for minute jobs. My turbo set came with what is effectively hypodermic syringes as welding tips, one shown on attached photo. There are also a range of larger brass tips for larger jobs.
As I say I have used this kit for all manner of uses and couldn’t do without it.
Happy to talk directly to anybody who would like further advice, see number at back of grey mag
, wrong procedure.
As I say I have used this kit for all manner of uses and couldn’t do without it.
Happy to talk directly to anybody who would like further advice, see number at back of grey mag
I am always interested in any information about Rosengart details or current owners.