04-06-2020, 04:40 PM
(This post was last modified: 04-06-2020, 04:56 PM by Tony Betts.)
Found this earlier whilst sorting a cam for a customer.
The bottom cam is a standard XL cam for a mag engine.
Check out the width of the inlet loans on the top camshaft.
The loabs are a 1/3 wider.
The camshaft looks to be an original cast or forged cam, but I can't find any numbers on it. I've put a mic on it. The inlet loabs are 15 thou bigger across the lift and 10 thou bigger across the dwell.
What do you think. SPORTS.?
Thanks tony.
A closer look.
I've never seen one of these before, so I'm hoping you experts know what it is.
Thanks tony.
The bottom cam is a standard XL cam for a mag engine.
Check out the width of the inlet loans on the top camshaft.
The loabs are a 1/3 wider.
The camshaft looks to be an original cast or forged cam, but I can't find any numbers on it. I've put a mic on it. The inlet loabs are 15 thou bigger across the lift and 10 thou bigger across the dwell.
What do you think. SPORTS.?
Thanks tony.
A closer look.
I've never seen one of these before, so I'm hoping you experts know what it is.
Thanks tony.