02-06-2020, 06:14 PM
My current 1932 RN saloon was a rot box, others have said why did you bother, but bother I did and during 25 years, we raised a family, moved house 3 times, built 2 garages and restored a 3 ton 1939 Broads sailing cruiser.
We did progress slowly and in the end bought in some help to paint and upholster her in time for my daughter's wedding.
What I am saying is that if you are not in a hurry, anything is achievable, if you are impatient to get her rolling, you have to be almost single minded and set your priorities . I didn't have much in the way of special tools (No MIG or oxy acetylene etc). just a carbon arc braze / welder which most would laugh at now, but it did the job.
Don't be disheartened, it has to get worse before it gets better!
Good luck
Bob
We did progress slowly and in the end bought in some help to paint and upholster her in time for my daughter's wedding.
What I am saying is that if you are not in a hurry, anything is achievable, if you are impatient to get her rolling, you have to be almost single minded and set your priorities . I didn't have much in the way of special tools (No MIG or oxy acetylene etc). just a carbon arc braze / welder which most would laugh at now, but it did the job.
Don't be disheartened, it has to get worse before it gets better!
Good luck
Bob