30-05-2020, 01:52 PM
(This post was last modified: 30-05-2020, 02:43 PM by Ivor Hawkins.
Edit Reason: Spelling error
)
I’ve come to the same conclusion John, I’m now going to run an Avometer over everything and try the armature in the oven at 100 degrees for an hour and see if that helps.
I will also take the dog out of the clip, mount the starter and see if it has enough grunt to turn the engine.
I’m doing this in between bead blasting and painting my wheels, so results depend on drying times!
I will also take the dog out of the clip, mount the starter and see if it has enough grunt to turn the engine.
I’m doing this in between bead blasting and painting my wheels, so results depend on drying times!