27-05-2020, 11:52 AM
(This post was last modified: 27-05-2020, 11:54 AM by Ian McGowan.)
Here is what Autosparks website lists as their AC2 WIRING HARNESS:
Austin Seven Ruby Wiring Harness Set
[b]Part NO:[/b] AN2c [b]Year:[/b]1935 - 1938 [b]Finish:[/b]Braided Cables with a Braided Outer Covering [b]Chassis NO:[/b] APE-ACA & APD-ARQ
Third Brush Control. Dynamo and Starter on R/H Side. Built with Twin Filament Headlamps as standard
They state that they do NOT do a wiring diagram for this but that they follow British Standard Wiring Colours which they list on their website here:
https://www.autosparks.co.uk/bscc
I would imagine that using the diagram here:
http://www.da7c.co.uk/technical_torque_a...4%20A4.pdf
combined with the BSW colour codes from Autosparks you should be able to progess.
Austin Seven Ruby Wiring Harness Set
[b]Part NO:[/b] AN2c [b]Year:[/b]1935 - 1938 [b]Finish:[/b]Braided Cables with a Braided Outer Covering [b]Chassis NO:[/b] APE-ACA & APD-ARQ
Third Brush Control. Dynamo and Starter on R/H Side. Built with Twin Filament Headlamps as standard
They state that they do NOT do a wiring diagram for this but that they follow British Standard Wiring Colours which they list on their website here:
https://www.autosparks.co.uk/bscc
I would imagine that using the diagram here:
http://www.da7c.co.uk/technical_torque_a...4%20A4.pdf
combined with the BSW colour codes from Autosparks you should be able to progess.