25-05-2020, 03:26 PM
My own RP still has its original sliding panel and track set. The overall front-to-back measurement of the panel, over the curve and allowing for the thickness of the fabric covering is 30 7/8". The distance from the extreme back edge of the sliding panel into the base of the transverse track channel is 1 5/8", but in a perfect world, the panel should probably slide forward by another 1/4", so 1 3/8" is probably nearer the mark.
The metal strip looks original.....interesting.
The interior strips on my car are ash and are 3/8" thick on the back and the nearside, but only 3/16" on the offside (?something to do with the locking bar?). I've seen some Rubies (possibly all Mk2s) with ply strips, but we generally supply them in ash.
The metal strip looks original.....interesting.
The interior strips on my car are ash and are 3/8" thick on the back and the nearside, but only 3/16" on the offside (?something to do with the locking bar?). I've seen some Rubies (possibly all Mk2s) with ply strips, but we generally supply them in ash.