All Alloy Cup progress

[AllAlloyCup]

   

Back on stream after a long layoff on other projects Life, C19 and blocked drains

Neil has supplied an old Ruby wheel centre and is about to turn it down to insert
it as a sleeve inside an old stock repro deep dished wheel. Planning to fix it inside
the chunky hub of this wheel and fix it with loctite and two grub screws.
I may slot a bit of the spline? To help the clamp bolt? 

I also need to take out the column before fitting as I need to add a small shim 
to the steering box button To remove a bit of the slack.

The petrol tank has been repaired ( I hope) I tested it with a bottle of meths and it seems oK.

So should be back on the road again some time in June, though still to
Solve a couple of other issues , one at a time .

Happy motoring and use this lockdown time to
Get those jobs DONE!

Regards

Bill G

Ps Good wishes to all GE owners who made last heard Guildtown
Such a good event,especially Ruairidh and Tom.