19-05-2020, 01:20 PM
I have been using wheel mounted guards for many years on my trials car,the ones on it were tube and failed as soon as i drove it .
I have two bosses welded on at 3 o'clock and 9 ,they have a bolt threaded into them from inside the backplate and tacked in place .this gives a stud to screw the brackets onto which are 25x5 flat bar.
The wings are alloy with a bead for extra rigidity.
At present they are hanging up in the garage as i painted them yesterday.
Planning to refit this afternoon and will try to post some pictures.
Andy
I have two bosses welded on at 3 o'clock and 9 ,they have a bolt threaded into them from inside the backplate and tacked in place .this gives a stud to screw the brackets onto which are 25x5 flat bar.
The wings are alloy with a bead for extra rigidity.
At present they are hanging up in the garage as i painted them yesterday.
Planning to refit this afternoon and will try to post some pictures.
Andy