19-05-2020, 07:14 AM
Hi Aaron
Here is a pic of the wing mounting on my special. As yet untested!
The 1/4 BSF countersunk bolts pass through slightly enlarged rivet holes in the hub carrier. The tubular stays are set off the carrier with aluminium spacers shaped to sit tightly to the backplate.
Hope this helps?
Cheers
Howard
Here is a pic of the wing mounting on my special. As yet untested!
The 1/4 BSF countersunk bolts pass through slightly enlarged rivet holes in the hub carrier. The tubular stays are set off the carrier with aluminium spacers shaped to sit tightly to the backplate.
Hope this helps?
Cheers
Howard