08-05-2020, 07:26 PM
Just contemplating cylinder heads and the need for Speedex to (efficiently) exit towards the rear of the car for the header.
I'm actually quite happy with a steel 37 head otherwise. But a comment was intriguing:
"one of the interesting things I've seen regarding cylinder heads is using the core-plug holes and feeding a pipe up from one or two (or more) vertically on to a 'horizontal' pipe that can face/drain forwards or backwards depending on your needs".
Has anyone done or experienced such that they would see as a good means of converting a steel head? I realise the core plug holes are smaller than the standard water outlet, but playing with my new electric water pump I see that that will be the smallest bore on the whole system.
I'm actually quite happy with a steel 37 head otherwise. But a comment was intriguing:
"one of the interesting things I've seen regarding cylinder heads is using the core-plug holes and feeding a pipe up from one or two (or more) vertically on to a 'horizontal' pipe that can face/drain forwards or backwards depending on your needs".
Has anyone done or experienced such that they would see as a good means of converting a steel head? I realise the core plug holes are smaller than the standard water outlet, but playing with my new electric water pump I see that that will be the smallest bore on the whole system.