04-05-2020, 04:30 PM
"The internal gear has three keyways so that it can be repositioned when wear becomes a problem"
As indicated in the technical article you get if you follow the link in one of the replies, this is NOT an easy DIY job.
The bloke who wrote the article preferred to re-grind his gears, rather than do it.
If you think you might want to try this, take further advice.
Cheers
Simon
As indicated in the technical article you get if you follow the link in one of the replies, this is NOT an easy DIY job.
The bloke who wrote the article preferred to re-grind his gears, rather than do it.
If you think you might want to try this, take further advice.
Cheers
Simon