02-05-2020, 05:13 PM
If you cross section a scrap crankcase you will realise how weak they really are. I think it took all of 5 minutes to hacksaw one in half and at 80 to nearly a hundred years old they deserve an easy life.
When trialling we used to use the top and bottom rubbers of the later rubber mounts with long bolts and locknuts at the rear and longer bolts bottomed out at the front.
When trialling we used to use the top and bottom rubbers of the later rubber mounts with long bolts and locknuts at the rear and longer bolts bottomed out at the front.