27-04-2020, 12:45 PM
I would recommend using either an EB (Mini 850) or AN (Morris Minor 1000) needle, they are known to work well on a standard engine.
If your needle is too rich, try altering its position in the piston. Move it out so the shoulder on the needle is about 1/32" proud of the piston.
If that improves things, all well and good!
If your needle is too rich, try altering its position in the piston. Move it out so the shoulder on the needle is about 1/32" proud of the piston.
If that improves things, all well and good!