20-04-2020, 03:24 PM
(This post was last modified: 20-04-2020, 03:26 PM by Jeff Taylor.)
Has he checked the brake hoses to make sure they haven't collapsed internally?
This has happened to the hydraulic brake hoses of a number of Morris Eight owners - the Morris 8 shares the same Lockheed master cylinder as the earlier 'T' Types though not the TD. The hoses can look perfectly fine on the outside but can delaminate internally reducing the pressure considerably.
This has happened to the hydraulic brake hoses of a number of Morris Eight owners - the Morris 8 shares the same Lockheed master cylinder as the earlier 'T' Types though not the TD. The hoses can look perfectly fine on the outside but can delaminate internally reducing the pressure considerably.