16-04-2020, 09:29 PM
(This post was last modified: 16-04-2020, 09:30 PM by Nick Salmon.)
Ruaridh - the plastic float should do the trick. I recently butchered an MGB sender, which has a similar float
I removed the porous metal float from the A7 unit, and with a bit of heating bent the arm into a circle - into which I pressed the plastic float.
It works a treat but I do know that because the arm is foreshortened an empty reading on the gauge actually means there is a fair bit of fuel in the tank.
I removed the porous metal float from the A7 unit, and with a bit of heating bent the arm into a circle - into which I pressed the plastic float.
It works a treat but I do know that because the arm is foreshortened an empty reading on the gauge actually means there is a fair bit of fuel in the tank.