08-04-2020, 02:13 PM
Hi Paul
As it happens I have the gearbox out to replace the clutch levers (see thread on 4 speed release bearing).
These show the position of the linkage and the juxtaposition of the Chummy brake and accelerator lever. Note I’ve “straightened” the brake pedal slightly but using a Ruby pedal should give quite a lot of adjustment to position and length.
Cheers
Howard
As it happens I have the gearbox out to replace the clutch levers (see thread on 4 speed release bearing).
These show the position of the linkage and the juxtaposition of the Chummy brake and accelerator lever. Note I’ve “straightened” the brake pedal slightly but using a Ruby pedal should give quite a lot of adjustment to position and length.
Cheers
Howard