06-12-2017, 11:42 PM
Hi Peter and Ruairidh
As you may know I’m building a Cup as well and
today the Windscreen was delivered from Willie at Austin Reproduction Parts.
Would appreciate any other information that’s available, eg caping stick shape that sits on the
Top of the windscreen..
I’ve got easy access to an excellent source of ash.
Does any of it need steam bent or can you just shape the
half corners?
Lots still to do , but asking Santa for a steel crank for Christmas.
Not sure if I’ve been good enough though!
Kind regards
Bill H
AllAlloyCup
As you may know I’m building a Cup as well and
today the Windscreen was delivered from Willie at Austin Reproduction Parts.
Would appreciate any other information that’s available, eg caping stick shape that sits on the
Top of the windscreen..
I’ve got easy access to an excellent source of ash.
Does any of it need steam bent or can you just shape the
half corners?
Lots still to do , but asking Santa for a steel crank for Christmas.
Not sure if I’ve been good enough though!
Kind regards
Bill H
AllAlloyCup
Based near the Scottish Border,